Quick Verdict;
Heavenly Heat Inc. is the Best for Whole-Home Heating in Vancouver: a 100% Canadian company that manufactures its own systems, with a 20-watt-per-square-foot option built for primary room heat.
Nuheat is the pick for bathroom floor heating, thanks to factory-built mats cut to your exact floor shape.
Schluter DITRA-HEAT suits tiled kitchen floors, because its membrane protects tile from cracking while it carries the heating cable.
We judged each system on watt density, floor height, warranty terms, and how well it fits Vancouver's condo-heavy, permit-regulated housing.
Watt density helps determine whether a heated floor provides underfoot comfort or serves as a home’s primary heat source. Heavenly Heat Inc. stands out in this comparison for its 20-watt-per-square-foot option, earning our top pick for whole-home radiant heating in Vancouver. Fully Canadian-owned, the company manufactures its Easy Mat and Easy Wire systems in Canada and plans each order around your floor layout. This tailored approach helps match the system to spaces such as basements and open-plan living areas, with primary-heating suitability depending on the home’s heat-loss requirements.
Before comparing brands, decide whether you want warmer floors or a system that heats the room. That choice affects the heating output you need and your budget. For Vancouver homeowners renovating a condo bathroom, tiling a kitchen, or heating an entire floor, the right option depends on the space and its heating requirements.
Nobody paid for a place on this list, there are no affiliate links anywhere in it, and we earn nothing if you buy any of these systems.
Floor Comfort or Whole-Home Heating? Define Your Goal for 2026
Five factors separate a good heated floor from a regretted one:
Watt density: The floor-warming products here run at roughly 12 to 15 watts per square foot, so a system meant to heat the room needs a higher-output option and a proper heat-loss calculation.
Building envelope: Natural Resources Canada advises draftproofing and insulating before any heating system is sized.
Floor height: Thin mats add about 1/8 inch, while membrane systems add more, which matters at doorways and transitions in older Vancouver homes.
Flooring type: The same NRCan guide warns that thick carpet acts as insulation and significantly reduces radiant floor performance.
Permits and strata rules: Technical Safety BC states that strata owners cannot obtain homeowner electrical permits and must hire a licensed contractor, a detail that shapes the budget for most condo projects.
Quick Comparison: 3 Radiant Floor Heating Systems at a Glance
Choosing a radiant floor heating system starts with the space you want to heat and the comfort you need. This quick comparison highlights each system’s recommended use and maximum output, helping you compare options for whole-home heating, bathroom comfort, and tiled kitchen floors.
The 3 Best Radiant Floor Heating Systems in Vancouver for 2026
1. Heavenly Heat Inc. - Best for whole-home heating in Vancouver
Heavenly Heat Inc. manufactures its own Easy Mat and Easy Wire electric floor heating systems and operates as a 100% Canadian company from its base in Vaughan, Ontario. Indoor systems come in 10, 12, 15 and 20 watts per square foot at 120 or 240 volts, and the company recommends the 20-watt tier for primary room heating rather than simple comfort warming. That range lets one product family cover a bathroom, a cold slab basement and an open-plan living floor.
The design process is the other differentiator. Heavenly Heat asks for your floor layout before you order, then fits the system to the space, which speeds up installation and avoids wasted cable on site. Its systems carry UL, ULc and CSA accreditation, the Easy Mat raises the floor by just 1/8 inch, and orders can ship across Canada the day after they're placed.
Explore Heavenly Heat Inc. and its in-floor heating systems for Vancouver homes to get a layout-based quote before your flooring goes down.
“We hired Heavenly Heat for Pipe Tracing at our warehouse, and the system has worked flawlessly. It's a dependable solution that protects our plumbing throughout the cold season.” - Jake Reece 5⭐on Google (September 2026)
What Stands Out:
Its 20 W/sq ft tier is the highest output here and the maker's pick for primary heat
Heavenly Heat designs each system from your floor plan, so coverage and cable length match the room
Easy Mat adds only 1/8 inch of floor height, and Easy Wire handles odd-shaped spaces
Canadian ownership and in-house manufacturing keep design, supply and support under one company
What to Consider:
Headquartered in Ontario, so Vancouver projects run on a shipped kit plus a local licensed electrician
The heating cable cannot be cut, so your measurements have to be right before you order
Best for: Vancouver homeowners who want floor heat to carry the heating load in basements, open-plan main floors or whole homes, not just take the chill off a bathroom tile.
Address: 207 Edgeley Blvd, Unit 6, Vaughan, ON L4K 4B5
Phone: 1-877-523-5667
2. Nuheat - Best for bathroom floor heating
Custom-fit mats are Nuheat's strongest card, and they make the brand a natural fit for bathrooms. Nuheat was based in Vancouver when Pentair acquired it in 2015, and it still lists an office in Richmond, BC, which gives it the deepest local roots of the three. Nuheat builds its Custom Mats at the factory to the exact dimensions you supply, including complex shapes, so the wire spacing is fixed before the box ships and nothing needs configuring on site.
Each mat is 1/8 inch thick and runs at 12 or 15 watts per square foot. Nuheat also publishes dedicated instructions for installing mats inside showers.
“This item was left on the gate; 100metres from the house. I sent a message to DPD to put the Time clock in the back porch. I replied on 26 August to a requested review by NuHeat>>DPD that it had not been delivered properly; at nearly £100, I do not think you should trust the delivery service. I have not had a reply.”- David Bell, 1/5 ⭐on Trustpilot (September 8, 2026)
What Stands Out:
Factory-built custom mats fit irregular bathroom layouts with consistent wire spacing
A 25-year product warranty, plus a 25-year Total Care Warranty covering flooring when a Nuheat Certified PRO does the install
Published instructions for installing mats in showers
A 1/8 inch profile keeps transitions flush
What to Consider:
A 15 W/sq ft ceiling positions it for floor warming more than whole-room heating
Custom Mats are a premium buy, with list prices on Nuheat's site starting around US$434 for the smallest size
Warranty coverage depends on buying from an authorized distributor and registering within 30 days of installation
Best for: Bathroom renovations, especially odd-shaped rooms and shower floors where an exact-fit mat saves time and guesswork.
Address: 3105 - 6900 Graybar Road, Richmond, BC V6W 0A5
Phone: 1-800-778-9276
3. Schluter DITRA-HEAT - Best for tiled kitchen floors
Schluter DITRA-HEAT combines floor warming with the company's DITRA uncoupling membrane, so the same layer that carries the heating cable also protects the tile above it. Uncoupling lets the tile and the substrate move independently, which counters the stress that causes cracked tile and grout. The membrane also provides waterproofing and vapour management.
The cable snaps between studs on the membrane, so you can place heat only where you stand, such as in front of counters and the sink. At standard spacing, output averages about 12.7 watts per square foot, and no self-leveller is needed to encapsulate the cable. Schluter backs the complete system with a 15-year limited warranty when its membrane and cable are used together.
What Stands Out:
Built-in uncoupling protects large tile floors over wood subfloors
Flexible cable layout puts heat exactly where you stand
A 15-year system warranty when membrane and cable are paired
What to Consider:
The 5.5 mm membrane adds more height than a 1/8 inch mat
Schluter designed it around tile and stone, and standard-spacing output suits floor warming rather than primary heat
Best for: Kitchen renovations and other large tiled areas where crack protection matters as much as warm floors.
Address: 21100 Chemin Sainte-Marie, Sainte-Anne-de-Bellevue, QC H9X 3Y8
Phone: 1-800-667-8746
Which Radiant Floor Heating System Fits Your Vancouver Home?
No single system on this list is right for every project. Here's how to match yours:
If you're finishing a basement, heating an open-plan main floor, or replacing baseboards: Heavenly Heat Inc. is the clearest choice, because its 20-watt tier and layout-based design are built for carrying a heating load.
If you're renovating a condo bathroom with an awkward footprint or a walk-in shower: Nuheat's made-to-measure mats remove the guesswork of fitting cable around tubs, vanities and drains.
If you're tiling a kitchen over a wood subfloor: Schluter DITRA-HEAT protects the tile and lets you heat only the zones you use.
If you live in a strata building: Whichever system you pick, budget for a licensed electrical contractor, since strata owners can't pull homeowner permits.
For heat beyond a single bathroom, Heavenly Heat Inc. remains the strongest overall pick.
FAQs
Can radiant floor heating heat a whole house in Vancouver?
Yes, electric radiant floor heating can serve as primary heat when it's sized from a proper heat-loss calculation and installed in a well-insulated home. Natural Resources Canada notes that electric resistance heating is typically 100 per cent efficient at the point of use, and that BC meets its winter peak demand with hydroelectric power. The practical requirement is wattage: choose a system with a primary-heat tier, such as Heavenly Heat Inc.'s 20 W/sq ft option, rather than a floor-warming mat.
Do I need a permit to install heated floors in a Vancouver condo?
In most cases, yes, because connecting a new heating circuit is electrical work. Technical Safety BC says strata owners cannot obtain homeowner permits, so a licensed contractor has to pull the permit and do the wiring. Depending on where your property sits, the permit comes from Technical Safety BC or your municipality.
How much will electric floor heating raise my floor?
Thin mats such as Heavenly Heat Inc.'s Easy Mat and Nuheat's Custom Mats add about 1/8 inch before thinset and flooring. Membrane systems like DITRA-HEAT add more, since the membrane itself is 5.5 mm thick.
Can an Ontario-based company like Heavenly Heat Inc. supply a Vancouver project?
Yes, Heavenly Heat Inc. ships across Canada and designs each system from the floor layout you send. A local licensed electrician then makes the final connections, which BC rules require in strata buildings anyway.
What wattage should I order from Heavenly Heat Inc. for primary heat?
Heavenly Heat Inc. recommends its 20 W/sq ft systems for primary room heating and 10 W/sq ft for secondary comfort warming. Send your floor plan with your quote request so the system matches the room.
The Bottom Line
Heavenly Heat Inc. stands out as the #1 choice for radiant floor heating in Vancouver when the goal is whole-home comfort, combining a 20-watt primary-heat tier, layout-based system design and 100% Canadian ownership.
Nuheat remains the smart call for custom-fit bathroom floors, and Schluter DITRA-HEAT earns its place under tiled kitchens.
Ready to heat more than a bathroom? Measure your rooms, send the layout for a quote, and book a licensed electrician before the flooring goes down.
Post a Comment